Light Traffic Protection
Light Bollard
6.3-inch rotating-module bollard for light traffic, where the standard bollard does not fit.
Overview
The Ennat Light Bollard marks and protects in areas of light traffic. It measures 6.3" in outer diameter against 8.7" on the standard-line bollard, at the same protection heights, so it fits in tight spots where the standard one does not and takes roughly half the floor area. The rubber module rotates on the axis of the base, so a glancing contact is deflected instead of being taken head on, and the module can be swapped in the field if it is damaged.
- Rotating rubber module on a steel base, sized for low-energy contact
- 6.3" outer diameter against 8.7" on the standard-line bollard, at the same protection heights
- Roughly half the weight of the standard-line bollard, which simplifies handling and installation
- Field-replaceable module: the rubber turns on the base axis and comes off without replacing the post
- Not designed for impact protection and not rated for forklift traffic
Specifications
| Protection height | 7" (18 cm) |
| Diameter | 6.3" (16 cm) |
| Weight | 8.9 lb (4.0 kg) |
| Configuration | Rotating rubber module, 5.9" diameter, inserted in the base and turning on its axis. Field-replaceable, smaller than the PB100 of the standard line. |
| Material | Steel + NR rubber |
| Finish | Yellow electrostatic paint |
| Temperature range | 0°F to 160°F |
| Fastening | 3/8" × 4" anchor bolt, 4 per base (all positions) |
| Galvanized option | Available |
Often paired with
