Impact Protection
Bollard
Modular rubber-and-steel bollards and corner guards that absorb impact at the base, protecting the floor, the anchor and the asset.
Overview
Traditional fixed steel bollards transfer impact forces straight into the slab and anchors, causing floor damage and catastrophic failure. The Ennat Bollard dissipates collision energy through its vulcanized-rubber base, protecting the floor, the fixing and the protected asset alike. Its modular construction means only the damaged component is replaced after an impact, not the whole post.
- Hybrid rubber-and-steel construction absorbs energy where collisions occur
- Modular stackable design reconfigures as facility needs evolve
- Only the damaged module is replaced, not the whole bollard
- From low-profile corner guards to full-height pedestrian bollards
Specifications
| Protection height | 7" |
| Weight | 18.7 lb |
| Impact rating | ~7 kJ |
| Forklift equivalent | 6,000 lb @ 5.2 mph |
| Material | Steel + NR rubber |
| Finish | Yellow electrostatic paint |
| Temperature range | 0°F to 160°F |
| Fastening | 1/2" × 4¼" anchor |
| Galvanized option | Available |
Often paired with
