Light Barrier
Rotating-module barrier for light-traffic areas, with spans of up to 12 ft between bases.
The Ennat Light Barrier delimits and protects areas of light traffic. It is built from the same logic as the rest of the Ennat range, steel bases with vulcanized rubber modules, but sized for a different job: absorbing the low-energy contact of manual and light electric pallet jacks rather than forklift impact. Its rubber modules are smaller than those of the standard line and rotate on the axis of the base, so a glancing contact is deflected instead of being taken head on. Because it is not carrying forklift loads, the run can span up to 12 ft between bases against roughly 4.7 ft on the standard line, which halves the number of bases and anchors on the same length of run. It comes in two versions: the standard barrier, with one rail at 17.7", and the double, with two rails at 43.3" where more visual presence is needed.
- Rotating rubber modules on steel bases, sized for low-energy contact from manual and light electric pallet jacks
- Two versions: standard with one rail at 17.7", double with two rails at 43.3"
- Made to measure: length configured to each run, with crossbars from 2 to 12 ft
- Longer crossbars mean fewer bases and fewer anchors on the same run
- Each module turns on the axis of its base and is replaceable in the field
- Not designed for impact protection and not rated for forklift traffic
| Protection height | 17.7" (45 cm) |
| Configuration | One rail |
| Configuration | Rotating rubber module, 5.9" diameter, inserted in the base and turning on its axis. Field-replaceable, smaller than the PB100 of the standard line. |
| Material | Steel + NR rubber |
| Finish | Yellow electrostatic paint |
| Temperature range | 0°F to 160°F |
| Fastening | 3/8" × 4" anchor bolt, 4 per base (all positions) |
| Galvanized option | Available |
